• Adjustable swing-arm display allows you to set the display at desired position to avoid spill-over
• Simple and easy to operate with large clearly marked keys
• Rugged construction and a large pan size make the FP Series ideal for many industrial and jewelry applications
• Eleven different weighing modes
• A&D's exclusive ACAI Counting Function Increases accuracy for parts with inconsistent weight by continuously updating the average piece weight.
• Hi, Go, Lo Comparator function (optional FP-04) with built-in buzzer makes check weighing easy
• Animal weighing mode provides stable readout for moving animals
• Percentage function saves time and extra steps for formula weighing & change of weight applications

All A&D FP-Series purchased with the optional RS232C interface (part # FP-03) can use the A&D WinCT balance communication software to interface your precision weighing balance with your computer.

A&D Model:

FP-6000

FP-6200*

FP-12K

The FP is discontinued and replaced with the GP Series and GX-K Series.
This page is for reference only

6100.1 x 0.01

6100.1 x 0.1
1000.1 x 0.01

12101 x 0.1

215.175 x 0.0005

215.175 x 0.005
35.2775 x 0.0005

426.85 x 0.005

13.4484 x 0.00005

13.448 x 0.0005
2.2048 x 0.00005

26.678 x 0.0005

13 lb 7.17 oz

13 lb 7.17 oz
2 lb 3.28 oz

26 lb 10.85 oz

30500.5 x 0.05

30500.5 x 0.5
5000.5 x 0.05

60505 x 0.5

3922.46 x 0.01

3922.5 x 0.1
643.08 x 0.01

7781.1 x 0.1

196.123 x 0.0005

196.123 x 0.005
32.154 x 0.0005

389.055 x 0.005

94139 x 0.2

94140 x 2
15434 x 0.2

186746 x 2

1626.695 x 0.005

1626.7 x 0.05
266.705 x 0.005

3226.95 x 0.05

522.994 x 0.001

522.99 x 0.01
85.744 x 0.001

1037.48 x 0.01

161.381 x 0.0005

161.38 x 0.005
26.458 x 0.0005

320.135 x 0.005

162.978 x 0.0005

162.98 x 0.005
26.72 x 0.0005

323.305 x 0.005

161.408 x 0.0005

161.41 x 0.005
26.4625 x 0.0005

320.19 x 0.005

162.6695 x 0.0005

162.67 x 0.005
26.6695 x 0.0005

322.695 x 0.005

195.203 x 0.0005

195.205 x 0.005
32.003 x 0.0005

387.23 x 0.005

1301.355 x 0.005

1301.355 x 0.05
213.355 x 0.005

2581.55 x 0.05

0.01%

0.02 g

0.05
0.02 g

0.1 g

± 0.03 g

± 0.1
± 0.02 g

± 0.2 g

± 3ppm/°C

± 8ppm/°C

± 5ppm/°C

4 seconds.

3.5 seconds.

3.5 seconds.

210 x 245 mm

8.27 x 9.65 Inches

8.5 kg (18.72 lb)

100, 120, 220, 240 VAC (AC Adapter) 50Hz/60Hz All balances shipped with 120V AC Adapter. Other voltages add $25.00

Manual, AC Adapter, A&D FP-6000 comes standard with draft shield.

FP-03 Serial Interface RS-232C/Current Loop, FP-04 Current Loop with 20mA Interface, AD-1652 Infrared Cordless Keyboard, Printer

*FP-6200 dual range high capacity balance. All specs in green denote lower range.

Specifications subject to change

Weighing Units for the FP Series are the same as GP Series except "grains weighing mode" is also available on the GP Series.  Weigh below feature for magnetic materials and density determination is not available on the FP Series, but is with the GP Series.  The GP Series is also IP-65 rated (dust and moisture resistant) & equipped with internal motorized calibration which should be considered when deciding on the FP or GP series.  See the full line of A&D GP Series high capacity balances with accuracy to 0.1 gram and capacities up to 102kg.